Paint splashes
Fresh water-based paint drops usually come off tiles, glass and frames with water and patience. Older or oil-based paint is handled carefully so the surface underneath is not scratched.
After builders and decorators
Post-renovation cleaning in Tbilisi: dust, paint and grout haze
Post-renovation cleaning is the careful clean that follows builders and decorators: fine construction dust is removed in several top-to-bottom passes, paint, plaster and grout haze is lifted, protective films come off and new fixtures are wiped without scratches. The price depends on floor area, how much residue is left and whether the debris is already out. Send photos and the square meters by call, text or WhatsApp in English to get a quote and a date.
- Several dust passes, ceiling to floor
- Paint splashes, plaster and grout haze
- Protective films and stickers removed
- Coordination in English by phone or WhatsApp
The service
What post-renovation cleaning covers
This is not a regular tidy-up. It is a targeted clean for surfaces that were just built, plastered, painted, tiled or installed, where the main enemy is a layer of mineral dust that keeps coming back if it is only wiped once.
After a renovation, dust sits on every horizontal edge, inside cabinets that were open during the works, on window frames, on radiators and in the tracks of sliding doors. It also hides in places people forget: the top of the door frames, light fittings, sockets, ventilation grilles and the space behind the toilet. Paint and plaster leave speckles on tiles and glass, and tilers often leave a thin cloudy film of grout on the surface they just laid.
A typical scope includes:
- dry removal of loose dust from ceilings, walls, shelves and floors
- wet wiping of walls where the paint has cured, doors, frames, skirting boards and radiators
- inside and outside of kitchen cabinets, drawers and wardrobes
- windows, frames, sills and balcony glass, including removal of protective tape
- bathroom tiles, grout lines, shower glass, sinks and toilets
- floors cleaned several times, with the method chosen for the finish
If the flat also needs a full top-to-bottom clean of lived-in rooms, such as a kitchen that was not part of the works, see our deep cleaning page. The cleaning services overview lists every type of clean we coordinate.
Why one pass is not enough
Construction dust settles again, so it is cleaned in stages
Plaster, gypsum board and cement dust is extremely fine. It floats for hours after it is disturbed and lands again on surfaces that were already clean.
That is why the work always runs from the top of the room to the bottom and from the far end of the flat toward the entrance. Cleaning the floor first and the shelves afterward simply moves dust from one surface to another. Household vacuum cleaners also clog quickly on this kind of powder, and wiping with a dry cloth tends to smear it into streaks.
- 1
First pass: loose dust
Ceilings, upper walls, frames, shelves and floors are cleared of the heavy layer, working from high to low.
- 2
Second pass: wet wipe
Surfaces that can take water are wiped with clean cloths and fresh water, which is changed often so the dust is not spread around again.
- 3
Settling time
The remaining fine particles are allowed to settle, while windows can be opened for air if the weather and building allow it.
- 4
Final pass and check
A last round catches what has landed since, followed by a walk-through with you or with photos sent to you if you are not in Tbilisi.
On heavy jobs some dust can still appear over the next few days as air moves through the flat. A light follow-up wipe may be needed, and this can be discussed when you book.
Stubborn residue
Paint, plaster, grout haze and protective films
Each type of residue needs a different approach, and the wrong one can damage a finish that cost a lot to install. The cleaner first checks what the surface is before choosing a method.
Plaster and putty
White smears on floors, sills and sockets are softened and lifted rather than scraped hard, because dried plaster can be abrasive and leave marks.
Grout haze
The cloudy film on new tiles is removed from the tile face without digging into fresh grout lines. If the tiler recommended a specific product, tell us before the visit.
Protective films
Films on windows, doors, appliances and profiles are peeled off, and the adhesive left behind is cleaned. Film that has baked in the sun for months is harder to remove and takes longer.
Labels and tape
Stickers on glass, sanitaryware and radiators, plus masking tape left by painters, are taken off along with the glue residue.
Silicone and foam
Excess sealant or expanding foam is a trade issue. It is pointed out to you so the installer can fix it, instead of being cut away by a cleaner.
Protecting what is new
Cleaning new fixtures without scratching them
Glossy kitchen fronts, matte black taps, chrome shower sets, lacquered doors, stone worktops and new parquet all react differently to cleaning. Most scratches after a renovation are caused by a cloth dragging grit across the surface, so dust is always lifted before anything is rubbed.
- No steel wool or abrasive pads on glass, enamel, chrome or painted surfaces
- Stone and marble are cleaned with neutral methods, since acidic cleaners can etch them
- Wooden and laminate floors are not flooded with water
- Appliances are wiped outside and inside, but not taken apart
- Manufacturer care notes left in the boxes are followed when you share them
If the floor itself still needs work, for example sanding or a final lacquer coat, it is better to finish that first. We can arrange it through our floor sanding page (in Georgian) or the flooring page (in Georgian), and schedule the clean for afterward. Air conditioners that ran during the works often pull dust inside the unit, and that is a separate job described on our AC cleaning page.
Before we start
Debris has to be removed first
Cleaners work on surfaces, not on piles of rubble. Broken tiles, cement bags, offcuts of plasterboard, cardboard from appliances and old fittings need to leave the flat before the clean begins. Otherwise every bag carried out through the rooms brings new dust with it and undoes the work.
If the builders did not take their waste with them, it can be removed separately. Details are on our waste removal page (in Georgian), and the team can talk you through it in English when you call. Ideally the waste goes out a day or two before the cleaning date.
Please tell us about any hazardous leftovers, such as solvent cans or chemical containers, before the visit. They are not handled as part of the clean.
Scheduling
When to book: after the last trade leaves
The best time for the clean is when nobody will drill, sand or paint in the flat again. A single electrician coming back to fit a socket can cover a finished room with dust. Before choosing a date, ask each trade whether they are really done.
| Stage | What happens | Clean now? |
|---|---|---|
| Rough works | Walls, screed, wiring and pipes | No |
| Finishing | Painting, tiling, flooring, ceilings | No |
| Installation | Kitchen, doors, sanitaryware, lights, electrician (in Georgian) final fittings | Not yet |
| Waste removal | Rubble and packaging taken out | Book the clean |
| Post-renovation clean | Multi-pass cleaning and final check | Yes |
| Furniture delivery | Sofas, beds, boxes arrive | After the clean |
Furniture should ideally arrive after the clean, so there is nothing in the way and nothing to collect dust. Our furniture carrying service can be booked for the following day.
Tbilisi new-builds
White frame apartments and building rules
Many new residential blocks in Tbilisi, especially in Saburtalo, Dighomi, Didube and Isani, sell flats as "black frame" (bare concrete) or "white frame" (plastered walls, screed floors, often with windows and a front door). The owner then fits out the flat with their own contractors. Because every room is finished from scratch, these flats usually carry the heaviest dust load of any job we see.
Older buildings in Vake, Vera, Sololaki and Mtatsminda bring different issues. Renovations there often involve chasing old walls and replacing old steel pipes or aluminium wiring, which produces a lot of brick and lime dust, and the stairwell may be narrow with a small lift or none at all.
The building side
Some new buildings have an administrator or residents' association with rules about working hours, lift use and where waste can be left. Let us know about these when you book. If you are a foreign owner who managed the renovation remotely, we can coordinate the date with your contractor and send photos of the finished result.
Cost
How the price is worked out
There is no fixed tariff for this work, because two flats of the same size can be very different after renovation. The quote is given after you send a description and photos.
- Total area and number of rooms, bathrooms and balconies
- How heavy the dust is and whether residue like paint or grout haze is present
- Number and size of windows, including balcony glazing
- Whether furniture or kitchen units are already installed
- Access: floor, working lift, parking near the entrance
- Urgency, if the clean is needed at short notice
Who supplies the cleaning products and any special cleaners for stone or tiles is agreed when booking, as is the payment method. If an extra problem is found on the day, such as a much larger area of film than the photos showed, it is discussed with you before any extra work is done.
FAQ
Frequently asked questions
How soon after the renovation can the clean be done?
As soon as the last trade has finished and the waste is out. Fresh paint should be dry to the touch, and wet wiping of painted walls is left until the paint has cured, which your painter can confirm.
Do you remove construction rubble as part of the clean?
No, cleaning and waste removal are separate services. Rubble can be taken away through our waste removal service (in Georgian), ideally before the cleaning day.
Can you clean a white frame flat that has just been handed over?
Yes. A just-delivered white frame flat mainly has plaster and screed dust. Many owners book one clean before fit-out to see the space properly and another at the end.
Will the dust be completely gone after one visit?
The flat is cleaned in several passes during the visit. On very dusty jobs a fine layer can still reappear over the next days, and a short follow-up can be arranged if needed.
I live abroad. Can the clean be done without me there?
Yes, if someone can let the team in, for example your contractor, a neighbor or a building administrator. We coordinate in English and send you photos after the work.
Do the cleaners speak English?
Not necessarily. Booking, questions and updates are handled in English by phone, text or WhatsApp, and we pass your instructions on to the team.
Can the same team clean the air conditioner as well?
Dust inside an AC unit needs a technician, not a cleaner. Book it separately through our AC cleaning service.
Contact
Get a quote for cleaning after your renovation
Send the area, a few photos and your move-in date. We reply with a price and available days.
Send a short description
Mention the square meters, the district and whether the waste is already removed.
Next step
Ready to move into a clean flat?
Tell us when the builders finish and we will plan the clean around that date.